
Power your home
with the sun.
Cleaner energy, lower bills, and a system planned around your roof — by one accountable team.
Calculate your savings.
Your PIN code and monthly bill are enough to see system size, subsidy, payback and an indicative cost — with every assumption shown.
Open the full calculatorWhat could solar save you?
Enter your PIN code and monthly bill to see an instant estimate.
Solar for every kind of roof.
Products, engineering and installation brought together, then shaped around the people and place using them.
Homes
A rooftop system planned around your energy use, roof and, where eligible, PM Surya Ghar assistance.
Explore homesHousing societies
Common-area solar with load planning and a proposal built for committee review.
Explore housing societiesBusinesses
Rooftop solar for offices, shops and warehouses, engineered around your working hours.
Explore businessesIndustrial EPC
Larger rooftop projects with design, procurement and installation handled end to end.
Explore industrial EPCWhat a proper solar project looks like.
Going solar is a long-term decision. These are the parts we refuse to skip.

A survey, not a sales call
Roof condition, shade, structure and meter connection are checked before we recommend a size.

One team through the project
Design, supply and installation are coordinated by the same team instead of separate vendors.

Mounting planned for monsoon
Rails, clamps, drainage and cable routing are detailed for Indian weather and your roof type.

Reachable after switch-on
Cleaning guidance, performance questions and service requests stay with a team you can call.
Representative imagery. Every installation is planned to the site.
Four checks that shape an honest proposal.
A solar system is only as good as the survey behind it. We inspect first, then put the numbers in writing.
- 01Roof condition and usable areaWhat the structure can carry, where the array fits and how access will work.
- 02Shade and generationHow trees, water tanks and neighbouring buildings affect the output we can promise.
- 03Structure and cable routeRails, clamps, drainage and a tidy cable path planned for your roof.
- 04Subsidy and paperworkEligibility, the PM Surya Ghar route and what you need to submit, explained up front.
We guide the journey. You stay informed.
Tell us about your site
Share your location, bill and goals so we can understand what you need.
Get a site assessment
We look at your roof and requirements before recommending anything.
Review your proposal
See the scope, assumptions and costs explained clearly, and ask questions.
Installation and support
Your project is installed and you stay informed through the project.

Know your numbers.
Try a simple EMI estimate, or run the full savings calculator with subsidy and adjustable assumptions.
Estimate a possible solar EMI.
Use your own amount, rate and term. This is a loan calculation, not an offer.
Enter your PIN code and monthly bill to see system size, subsidy, cost and payback — with every assumption visible.
Frequently asked questions
Straight answers about sizing, subsidy, backup and what happens after installation.
We are a solar EPC company based in Pune. EPC means engineering, procurement and construction — we design your system, supply the panels, inverter and structure, install everything, and support you after switch-on. One team handles the whole project instead of you coordinating separate vendors.
A rough planning figure is 80 sq ft of unshaded roof per kW. A typical 3 kW home system therefore needs about 240 sq ft. The exact layout depends on your roof shape, shadows from water tanks or neighbouring buildings, and panel orientation — which is why we survey before quoting.
A correctly sized on-grid system offsets the energy you generate and use (or export under net metering). Savings depend on your tariff, daytime usage, roof conditions and local export rules. Our calculator shows an estimate with every assumption visible — treat it as a starting point, not a promise.
Under the PM Surya Ghar scheme, eligible residential rooftops can receive ₹30,000 per kW for the first 2 kW and ₹18,000 for the third kW — up to ₹78,000. Eligibility, approved equipment and the application process matter, and rules can change. We guide you through the current process; see our subsidy guide.
We hand over documentation, explain monitoring, and stay available for maintenance and questions. Panel cleaning, connection checks and generation reviews keep a system performing year after year. Ask us about maintenance options for your site.
Maharashtra is our core service area. For other locations, share your PIN code — coverage depends on project size, team availability and site conditions, and we confirm case by case before committing.
Solar panels (PV modules) that convert sunlight to DC electricity, an inverter that converts it to usable AC power, a mounting structure fixed to your roof, AC/DC cables and combiner boxes, earthing and protection devices, and a bi-directional meter for grid-connected systems. Hybrid and off-grid setups add batteries and a compatible inverter.
Sunlight hits the PV cells in the panels and generates DC electricity through the photovoltaic effect. The inverter converts it to AC power your home uses. Solar serves your loads first; a grid-connected system exports surplus through a bi-directional meter and imports from the grid when solar isn't enough — the two are netted under your state's metering rules.
Yes. The electricity a solar system produces is the same AC power you get from the grid — only the source differs. A properly designed installation includes earthing, surge protection, isolators and anti-islanding protection, and the structure is anchored for your roof type. Safety comes from design and installation quality, which is why a survey precedes every proposal.
As a planning guideline, bills above roughly ₹1,500 a month usually justify a closer look, because fixed system costs spread over more units. Below that, a smaller system or a hybrid for backup may still fit your goals. Run your numbers through our calculator — it shows the assumptions, so you can judge for your tariff and usage.
Yes, with reduced output on cloudy or rainy days. Generation estimates for a project are built on annual averages that already account for low-sun months — not just peak summer performance. Winter sun can actually be efficient for panels; it's cloud cover and shorter days that lower output.
A standard on-grid system shuts down during outages — feeding a dead grid could endanger line workers (anti-islanding protection). If backup matters, a hybrid system with batteries safely powers selected loads through cuts. We size storage around your essential loads and runtime, and show that cost openly.
All of them — lights, fans, fridge, TV, ACs, pumps and machinery. A grid-connected system runs everything as usual because solar and the grid supply your home together. For backup or off-grid, the question is energy budget: heavy loads like ACs and pumps dominate it, so we inventory your appliances before sizing anything.
Yes — dust, bird droppings and pollen can shave a noticeable slice off generation. In Pune's dry months, cleaning every 2–4 weeks with plain water and a soft cloth or brush keeps output close to spec. Avoid abrasives and detergents, and clean early morning or evening when panels are cool. Ask us about maintenance support if you'd rather not do it yourself.
Usually yes. Metal-sheet (GI/color-coated) roofs use clamped or penetrated fixings suited to the profile; RCC roofs use anchored foundations. Brittle roofs (like old asbestos) or structurally weak roofs need repair or replacement first — the survey checks condition before any design, and we say so honestly if a roof isn't ready.
Quality panels carry performance warranties of 25 years or more, with slow degradation (around 0.5% a year is typical). Inverters usually carry 5–10 year warranties with extendable options, and batteries (in hybrid/off-grid systems) have shorter lives quoted separately. The structure and protection gear last decades when installed and inspected properly.
Unshaded roof space you own or have rights over, access for the installation team, and — for grid-connected systems — an electricity connection in your name with a sanctioned load that supports the size. The survey confirms all three. From there, one accountable team handles design, supply, installation and the metering/subsidy paperwork.
Payback depends on your tariff, consumption pattern, system cost, subsidy eligibility and export rules — there is no single honest number for everyone. Our calculator estimates it with every assumption visible and adjustable, and your site-specific proposal replaces the estimates with real figures. Treat any guaranteed payback promise from anyone as a sales claim, not engineering.
Talk it through before you commit.
Ask questions, understand your options and clear every doubt with the DSP team.
- Discuss your roof and energy needs
- Understand product and system options
- See the assumptions behind every estimate
- Know the next steps before you proceed

Based in Pune.
Coverage depends on project type, team availability and site location. Share your PIN code and we will confirm.
Start with a conversation.
Tell us about your project and our team will follow up.
Based in Pune. Share your PIN code and we'll confirm service availability for your location.
